Add cozy, vintage holiday vibes to your projects with this Yarn Snowman Y DTF Transfer. Designed with a stitched, hand-crafted look, this cheerful snowman is perfect for holiday tees, hoodies, totes, craft fairs, and market-season apparel.

✅ Sizes & Recommended Uses

• 1.4” x 2.0” Mini – great for hats, sleeves, onesies, or small kids’ tees

• 2.8” x 4.0” Small – ideal for left-chest designs, tote corners, or youth apparel

• 6.2” x 9” Medium – perfect for adult tees and lightweight sweatshirts

• 7.6” x 11.0” Large – ideal for hoodies, crewnecks, and statement holiday pieces

Transfer only — apparel not included.

🧵 DTF Transfer Details

• Bright, full-color print with a clean white underbase

• Printed on clear film for easy placement and alignment

• Soft-hand feel with strong durability

• Works on cotton, polyester, and blended fabrics

• No setup fees, no minimums

• Printed & shipped from New York by Get Things Printed

🔥 PRESS GUIDE (Updated for 2025)

Before You Press:

• Temp: 290°F

• If using a thin silicone mat, increase temp +15°F to +20°F (max 335°F)

• Pre-press garment 3–5 sec to remove moisture

• Place transfer ink side down / film side up

1️⃣ FIRST PRESS – 12 Seconds

• 290°F | Medium–firm pressure

• Cover with Teflon or parchment

• Press 12 sec

• ⚡ Hot Peel – peel immediately, smooth and low

• If lifting, re-press 3–5 sec

2️⃣ SECOND PRESS – 5 Seconds (Very Important)

• Same temp (290°F or adjusted)

• Cover with old blank shirt, parchment, or thin silicone mat

• Press 5 sec to seal the print and boost wash life

🧼 Wash & Care

• Wait 24 hrs before washing

• Wash cold, inside-out, gentle cycle

• Hang dry or low tumble

• Do not iron directly on print

🚨 Troubleshooting

• Edges lifting → re-press 3–5 sec

• Shiny print → use parchment or fabric on 2nd press

• Not bonding → temp too low, light pressure, or silicone mat needs +15–20°F

Tag us to get featured!