Perfect your vacation-themed apparel with this high-performance DTF Transfer displaying the eye-catching Cruise Mode design. Built on advanced Direct-to-Film technology, this transfer generates rich, long-lasting color that maintains integrity across all fabric types. Available in varied dimensions to suit your specific production needs, it provides the reliability and visual impact that skilled printers require for standout garment results.

✅ Available Sizes & Recommended Uses

10.9" x 11" – Large
Hoodies, crewnecks, adult tees

7.9" x 8" – Medium
Youth shirts, small adult tees, tote bags

6" x 6" – In-Between
Chest prints, kids’ tees, tote corners

4.0" x 4.0" – Small
Hat fronts, sleeves, pockets, small items

2.0" x 2.0" – Mini
Hat fronts, sleeves, pockets, small items

Choose the perfect size to match any project.

🧵 DTF Transfer Details

• Full-color DTF print with crisp white underbase

• Printed on clear film for fast, easy alignment

• Soft-hand feel with durable, stretch-resistant finish

• Works on cotton, polyester, and blended fabrics

• No setup fees • No minimums

• Printed & shipped from New York by Get Things Printed

🔥 PRESS GUIDE (Updated for 2025)

Before You Press:

• Temp: 290°F

• If using a thin silicone mat, increase +15°F to +20°F (max 335°F)

• Pre-press garment 3–5 sec

• Position transfer ink side down / film side up

1️⃣ FIRST PRESS – 12 Seconds

• 290°F | Medium–firm pressure

• Cover with parchment or Teflon

• Press 12 sec

• ⚡ Hot Peel — peel immediately, low and smooth

• If an edge lifts, re-press 3–5 sec

2️⃣ SECOND PRESS – 5 Seconds (Very Important)

• Same temp (290°F or adjusted)

• Cover with old shirt, parchment, or thin silicone mat

• Press 5 sec to improve durability + wash life

🧼 Wash & Care

• Wait 24 hrs before washing

• Wash cold, inside-out, gentle

• Hang dry or tumble low

• Do not iron directly on print

🚨 Troubleshooting

• Edges lifting → re-press 3–5 sec

• Shiny finish → use parchment or shirt for second press

• Not bonding → temp too low OR silicone mat needs +15–20°F increase

Tag us to be featured!