DTF Transfer Application Instructions

DTF Transfer Application Instructions

Follow these steps to achieve the best results when applying your DTF (Direct-to-Film) Transfers. Please note that all heat presses may vary, so adjustments may be needed based on your specific equipment.

Heat Press Settings

  • Temperature: Set your heat press to 330°F.

  • Pressure: Adjust to medium-firm pressure.

Application Steps

  1. First Press: Place the transfer on the garment and press for 15 seconds.

  2. Cool & Peel: Allow the transfer to cool completely before peeling the backing. Do not peel while warm.

  3. Second Press (Final Cure):

    • Cover the design with a Teflon sheet, parchment paper, or similar protective material.

    • Press again for 7 seconds to ensure durability and longevity.

Additional Notes

  • All heat presses may vary, so you may need to adjust time, temperature, or pressure slightly for optimal results.

  • For best results, wash garments inside out in cold water and tumble dry on low or air dry.